Effect of Machining Input Parameter on the Surface Roughness Quality
Amninder Singh1, Ashwani Kumar2
1Amninder Singh, Department of Mechanical Engineering, Sri SAI College of Engineering and Technology, Badhani, Pathankot, India.
2Asst. Prof. Ashwani Kumar, Department of Mechanical Engineering, Sri SAI College of Engineering and Technology, Badhani, Pathankot, India.
Manuscript received on July 02, 2017. | Revised Manuscript received on July 14, 2017. | Manuscript published on July 15, 2017. | PP: 14-18 | Volume-4, Issue-12, July 2017. | Retrieval Number: K10450641117/2017©BEIESP
Open Access | Ethics and Policies | Cite
© The Authors. Published By: Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Past few years an increasing interest in the surface finish produced in turning operation to obtain a product of high quality, the new cutting tool materials like high performance ceramics, coated carbides has been seen which have greatly improved machining of several engineering materials. The productivity during manufacturing can be enhanced by reducing machining cost and selecting appropriate machining parameters. The performance of machining process is depends on various parameters like tool geometry parameters, cutting parameters, tool materials, work piece materials. In this research work the effect of different back rake angle along with cutting parameters and speed has been investigated while machining AISI H11 steel with single coated carbide tools.
Keywords: Machining, Surface roughness, Feed, Rake angle, Speed, Coating.